Euro Manufacturing And Marketing
Electronic Products For The Automotive Market
Safety & Security
Go to more
Safety & Security Products
Go to previous
Safety & Security Products
E792 PARK SAFE
This Unit was designed to give an audible warning to the driver upon leaving the cab that the handbrake has not been applied.
The Unit works by sensing the handbrake and door switches. If the door is opened and the handbrake is not applied then a sounder gives an audible warning.
The Unit will work with the ignition on or off.
The output to the sounder can also be used to drive a warning lamp up to a maximum total current of
Wiring Diagram - Handbrake Switch to Positive
Wiring Diagram - Handbrake Switch to Negative
Connections:
Pin 1: Battery +ve - Constant
Pin 2: H/brake Sw. +ve supply
Pin 3: H/brake Sw. +ve side
Pin 4: H/brake Sw. -ve side
Pin 5: Sounder Output +ve
Pin 6: Sounder Output -ve
Pin 7: Battery -ve
Pin 8: Door Switch +ve side
Note:
Pins 6 and 7 are internally connected.
There are two ways to wire the Unit depending on the configuration of the Handbrake Switch and Bulb on the Vehicle. In both cases Pins 3 and 4 are wired across the Handbrake Switch, Pin 3 going to the
