24v-24v battery charger, e899, 24v-24v_battery_charger

Euro Manufacturing And Marketing

Electronic Products For The Automotive Market

E899 BATTERY CHARGER 24V - 24V @ 12A

Home

Step Up
Battery Chargers

Top Up Charger for Motor Homes & Canal Boats

Step Down
Battery Chargers

This Unit was designed to charge Batteries.

A Low Power Control Wire has been included to Stop and Start the Charger, reducing the need for High Current
On / Off Switches. This wire also senses the input voltage.

The Charger starts when the voltage reaches approx. 24V.

There is 1V of hysteresis to prevent spurious switching.

Wiring Diagram without
E917 Control Voltage Adjuster

The charger output current is limited to 12A.
The maximum input current has been limited to 15A
Protection against reverse polarity connection is achieved using external fuses.

For some applications it may be necessary to vary the Control Switching Voltage of the Unit.  Example: When charging Leisure Batteries from the Engine Battery and Alternator to prevent the Engine Battery from being discharged beyond the required level when the Alternator is not charging.

The E917 Control Voltage Adjuster is an add on module that allows the Installer to adjust the Voltage at which the Charger Switches On / Off.  

Wiring Diagram
with
E917 Control
Voltage Adjuster

Note:
If the Input Voltage is more than 28.5V, the Output Voltage will rise above 28V and the battery could overcharge

150A Electronic Charge Splitter

12V-12V @ 12A
Battery Charger