Electronic Products For The Automotive Market
Battery Management
E821 200A SOLID STATE SWITCH
Back to E840 Battery Monitor & Solid State Switch
Wiring Diagram Note:
The + Control Terminal is internally connected to the +ve In Power Terminal
The + Control Terminal is internally connected to the +ve In Power Terminal
Inductive loads must be diode suppressed.
Tighten the Solid State Switch power terminal
nuts properly. If the nuts are not tight, the Solid
State Switch will be damaged by heat
generated when the power is ON.
Tighten the Solid State Switch power terminal
nuts properly. If the nuts are not tight, the Solid
State Switch will be damaged by heat
generated when the power is ON.
